Step #6 Turning Off The Spoiler Stick Trim; Step #7 Establishing Flight Modes - JR X9303 2.4 Instruction And Programming Manual

Step #6 Turning Off the Spoiler Stick Trim

In the
SYSTEM M.
is highlighted. Depress the Selector to access the
STEP
TRIM STEP menu. Rotate the Selector to highlight
and press the Selector to access the spoiler trim value.
Rotate the Selector until a 0% is shown. This will turn

Step #7 Establishing Flight Modes

In the
SYSTEM M.
is highlighted. Depress the Selector to access the
SEL
Device select menu. Initially we are going to activate three
of the available five flight modes (Launch, Cruise and
Land). Rotate the Selector to highlight
the Selector to access the available switches that the
flight mode can be assigned to. For our purpose, assign
S-44
list, rotate the Selector until
[TRIM STEP]
list, rotate the Selector until
LAUN
[Devic. SEL]
SPEED
INH INH
INH
AIL D/R
ELE D/R
RUD D/R
off the spoiler trim, preventing any unwanted interaction
TRIM
with the spoiler trim and the spoiler stick. Depressing the
Selector will store the desired 0% value in the model
SPOI
memory. Press the LIST button to return to the System
Mode screen.
SPOI 10% FPRN
AILE 4 FLAP
ELEV 4
RUDD 4
the LAUN flight mode to L3P SW (left 3-position switch).
Devic.
Later you can change the flight mode to the position that
best suits your needs. Rotate the Selector until L3P SW
is highlighted and press the Selector to store the desired
and press left 3-position switch. Press the LIST button to return to
the System Mode screen.
LAUN
MOTO FLAP AUX2 AUX3 AUX4
AUX4 SW
BTFL FLAP SPOI AUX3 AUX4
R3P SW
SW LEV
L3P SW
BTFL SW
OUT: INH ACT
4
4
STK LEV SW
ACT INH ACT