Code 81 Model Name - JR 10X HELICOPTER VERSION User Manual

8.21 Code 81
Model Name
This function is used to name each model in the memory of your
transmitter, making it very convenient to change from one heli-
copter to another. You may also want to list the frequency of each
helicopter, should you use more than one frequency between
models. This helps prevent frustration at the flying field.
Accessing and Utilizing
the Model Name Function
To access the Model Name function, enter Code 81 in the code
number access selection or use the direct mode method.
Your screen will appear as follows:
Model number Touch to move cursor (cursor can
to be named only be moved to the right)
Cursor indicates
Indicates location of next
function being
alpha-numeric
programmed character
Touch any letter/number to enter at cursor. Touch
(Note: There is space in the model name for sixteen characters)
Note: There is space in the model name for 16 letters or num-
bers from the alpha numeric selections.
The vertical arrow ↑ serves as the cursor and indicates the posi-
tion of the next letter or number to be entered. To create a space
between numbers and/or letters, simply touch the horizontal
arrow → or touch the
key until you see the blank space
SEL
and touch this key.
To enter a number or letter, use the
number/letter appears, then press the number/letter. It will appear
in the indicated position.
Note: The cursor automatically moves to the next entry
position.
Touch the next letter or number until the model naming process
is complete.
Touch to memorize the model name and to exit this program.
ENTER
Note: The model name (and frequency, if entered) appears on
the initial screen each time the
Note: If Code 28, Data Reset, has been used, the model name
is also reset.
10X MANUAL Heli
Touch to
Touch
access next
to memorize data
screen of alpha-
and exit program
numeric selection
for next selection
key until the desired
SEL
10X is turned on.
PCM
57