Setting Up Land Mode; Step #30 Aileron-To-Rudder Mix - JR X9303 2.4 Instruction And Programming Manual

Step #30 Aileron-to-Rudder Mix

In rotate the Selector until
FUNC.LIST
highlighted. Press the Selector to access the Aileron-
to-rudder mix menu. Rotate the Selector to highlight
the cruise left value then press the Selector to access
that value. With the flight mode switch in the middle
cruise mode, give a full left aileron command and rotate
the Selector to achieve the desired left rudder throw.
Pressing the Selector will store the value. Now rotate the
Selector to highlight the launch right value and adjust it
to the desired position. Press the LIST button to return to
the Function Mode screen.

Setting Up Land Mode

In Step #8, Establishing Flight Modes, flight modes were
programmed to operate from the left front 3-position
switch. To select Land mode, the left 3-position switch
must be moved to the down position. In the main (info)
screen LAND will appear in the upper portion of the
display when Land mode is selected. When making
programming changes/adjustments in Land mode, this
3-position switch must remain in the lower position
during the process to allow the results of those
adjustments to be seen on the model.
is
AIL  RUD M
[AIL≥RUD M] ◊L
Left Right
CRUISE 0%
◊
LAUNCH 0%
LAND 0%
0%
0%
0%
S-61