Flap Sys. - Flap System - JR X9303 2.4 Instruction And Programming Manual

FLAP SYS. – FLAP SYSTEM
The X9303 2.4 features a three-position Flap System
with Elevator compensation, programmable Delay, and
an Auto Land feature. Its purpose is to allow the flaps to
be deployed in two different positions in addition to the
normal or fully retracted position. The Flap System is
available in the FUNC.LIST only if SYS. is selected on the
OUT line under FLAP in the Devic. SEL function within the
SYSTEM Menu.
Because deploying flaps generally causes a change in
pitch (Elevator trim), the Flap System provides for setting
an Elevator deflection for each flap position. This is called
Elevator Compensation. There is also a programmable Delay
in .1 second increments up to a maximum of 2 seconds.
The Delay determines how long it takes for the Flaps and
Elevator to reach their positions. The X9303 2.4 ensures that
the Flaps and Elevator reach their positions at the same time
resulting in smooth Flap deployment and retraction.
A-25