ACCESS THE SYSTEM MENU
1. Bring up the SYSTEM Menu by holding down the
ENT button while turning the transmitter on.
Model SEL- Model Selection
The first thing to do when setting up a new model is to
select the model to be used. It is best to select an unused
model number, however, a model that already contains
data for another model may be used so long as data
1. In the SYSTEM Menu, highlight and select Model
SEL using the Selector.
2. Use the Selector to highlight and select the desired
model number to be used.
H-2
[SYSTEM M.]
INFO-DISP
TRANSFER
Model SEL
TRIM STEP
MDL Name
Devic. SEL
Type SEL
SWASH TYP
MDL Reset
[Model SEL]
Select
1 GLID
2 ACRO
MODEL 3
MODEL 3 HELI
4 ACRO
5 GLID
for that model is no longer required. If the model type
is changed before deciding the model to be used, any
programming in this particular model will be lost.
3. Return to the SYSTEM Menu by pressing the
LIST button.