Flap And Aux Functions; Activating / Inhibiting Channels - JR X9303 2.4 Instruction And Programming Manual

Flap and AUX Functions

The Flap and Auxiliary functions can be assigned to
operate from several different switches, buttons or the
throttle stick. In device select, highlight the desired flap
or aux function and press the Selector to access the
available switches that can be programmed to operate
each function.

Activating / Inhibiting Channels

Channels 5 (motor), 7–9 can be inhibited, allowing them to
be used as slave channels, in programmable mix. Highlight
the desired ACT/INH below the appropriate channel. Press
the Selector to inhibit or activate the channel.
S-14
[Devic. SEL]
SPEED LAUN
MOTO FLAP AUX2 AUX3 AUX4
INH INH
BTFL FLAP SPOI AUX3 AUX4
SW
OUT: INH
[Devic. SEL]
SPEED LAUN
MOTO FLAP AUX2 AUX3 AUX4
INH INH
BTFL FLAP SPOI AUX3 AUX4
SW
OUT: INH
Select the desired switch by highlighting it and press
the Selector.
AUX3 LV
LEV STK LEV
FLAP LV
ACT ACT INH
LEV STK LEV
ACT ACT INH
SW
ACT
SW
ACT