Step #2- System Mode; Step #3 Selecting A Model Memory - JR X9303 2.4 Instruction And Programming Manual

Step #2- System Mode

Enter the
System Mode
ENT button while turning on the transmitter.

Step #3 Selecting a Model Memory

Depress the Selector to enter the model select menu.
Rotate the Selector to highlight
the Selector to access the 30 available model memories.
Rotating the Selector will allow memory model selection.
Choose the memory (1–30) that you intend to store the
current model in, then depress the Selector to store that
memory position. Press the LIST button to return to the
SYSTEM M. list.
S-42
by depressing and holding the
[SYSTEM M.]
INFO-DISP TRANSFER
Model SEL TRIM STEP
MDL Name Devic. SEL
Type SEL Wing TYPE
MDL Reset
and depress
Model SEL
[Model SEL]
Select
MODEL 1 MODEL 1 GLID
29 HELI
30 HELI
2 ACRO
3 GLID