Setting Up Cruise Mode; Step #22- Aileron-To-Rudder Mix - JR X9303 2.4 Instruction And Programming Manual

Step #22- Aileron-to-Rudder Mix

In rotate the Selector until
FUNC.LIST
highlighted. Press the Selector to access the Aileron-
to-Rudder mix menu. Rotate the Selector to highlight
the launch left value then press the Selector to access
that value. With the flight mode switch in the upper
launch mode, give a full left aileron command and rotate
the Selector to achieve the desired left rudder throw.
Pressing the Selector will store the value. Now rotate the
Selector to highlight the launch right value and adjust it
to the desired position. Press the LIST button to return to
the Function Mode screen.

Setting up Cruise Mode

In Step #8, Establishing Flight Modes, flight modes were
programmed to operate from the left front 3-position
switch. To select Cruise mode, the left 3-position switch
must be moved to the middle position. In the main
(info) screen will appear in the upper portion
CRUISE
of the display when Cruise mode is selected. When
making programming changes/adjustments in Cruise
mode, this 3-position switch must remain in the middle
position during the process to allow the results of those
adjustments to be seen on the model.
is
AIL  RUD M
[AIL≥RUD M]◊L
Left
CRUISE + 40%
◊ LAUNCH + 50%
LAND
Right
+ 40%
+ 50%
0% 0%
S-55