Motor Function - JR X9303 2.4 Instruction And Programming Manual

Activating and Assigning Flight Modes (continued)
To activate the speed thermal flight modes, highlight
and press the Selector to select the desired
SPEED
switch position.
Important: When the speed and thermal flight
modes are activated, launch and land always have
priority. Any time launch or land is selected they
will override speed, thermal or cruise. To access
speed or thermal, the launch switch must be in
the cruise position. Try selecting the various flight
modes several times while looking at the main
info screen and you'll quickly become familiar with
the switch priority.

Motor Function

The motor function can be assigned to operate from
several different switches, buttons or the throttle stick. In
device select, highlight
MOTO
access the available switches that can be programmed to
operate the motor.
Select the desired switch by highlighting it and press
the Selector.
AIL D/R = Aileron dual rate switch
ELE D/R = Elevator dual rate switch
RUD D/R = Rudder dual rate switch
[Devic. SEL]
SPEED LAUN
INH INH
INH
R3P SW
L3P SW
OUT: INH
and press the Selector to
[Devic. SEL]
SPEED LAUN
INH INH
AIL D/R
ELE D/R
RUD D/R
OUT: INH
AUX4 SW
Note: On the main info screen, the flight mode
that is activated will be displayed on the top
center of the screen.
Note: The flight mode switch direction can be
selected when the launch mode is programmed to a
switch. Select
of the launch land switch to meet your preferences.
MOTO FLAP AUX2 AUX3 AUX4
BTFL FLAP SPOI AUX3 AUX4
SW LEV STK LEV
ACT ACT INH
AUX4 SW =
R3P SW =
L3P SW =
BTFL SW =
TIME SW =
SPOI ST =
Note: If dual flaps are activated, the motor function
is not assigned to a channel. It will be necessary to
use a programmable mix to mix MOTO to any open
auxiliary channel in order to operate the throttle
when dual flaps are activated. Also see Motor Hold
on page S-27 for more details.
MOTO FLAP AUX2 AUX3 AUX4
BTFL FLAP SPOI AUX3 AUX4
R3P SW
SW LEV STK LEV
L3P SW
BTFL SW
ACT ACT INH
TIME SW
or . to reverse the direction
NORM REV
SW
ACT
Auxiliary 4 switch
Right 3-position switch
Left 3-position switch
Butterfly switch= Auxiliary 4 switch
Timer button
Spoiler stick
SPOI ST
SW
ACT
S-13