Snap Roll - JR X9303 2.4 Instruction And Programming Manual

SNAP ROLL

The X9303 2.4 has a Snap Roll system that is comprised of
a Snap Roll switch that is used in conjunction with Flight
Modes to select a direction (Right/Up, Right/Down, Left/
Up, and Left/Down) and deflections for Aileron, Elevator
and Rudder. Up to four directions and corresponding rates
can be programmed and a Direction/Rate combination can
be assigned to 1 or more of the 3 Flight Modes. Pressing
the Snap Roll switch causes the aircraft to snap roll in the
direction and according to the rates assigned to the Flight
Mode that is currently selected.
If Flight Modes have been activated, 3 of the Snap Roll
directions/rates can be assigned to them —one per Flight
Mode. If Flight Modes have not been activated then only
one of the directions/rates may be active and it must be
set/selected in the Snap Roll function. The Snap Roll
function is inhibited as a default and must be turned on in
order to use it.
2. Scroll over to the AILE deflection of the first direction
(R-D) and set it to a rather high percentage. Scroll
down to the ELEV deflection for the same direction
and set it to a modest value of perhaps 40% to prevent
"burying" the aircraft with too much Elevator during the
snap. Now scroll down to the RUDD deflection and set
it to a modest value like the Elevator.
3. Repeat step 2 for the other 3 directions.
A-36
[Snap Roll]
ACT
R-D ELEV 40%
FM0:R-D
R-U ELEV 40%
FM1:R-U
FM2:L-D
If the Snap Roll function is to be used, highlight and
select Snap Roll in the FUNC.LIST and then select
INH to activate it.
1. If Flight Modes were activated in the Devic. SEL
function, FM0, FM1, and FM2 will appear down
the left hand side of the display. Select each one and
assign a direction (RIGHT-DOWN, RIGHT-UP,
LEFT-DOWN, LEFT-UP) from the list for each of the
3 Flight Modes.
If Flight Modes are not activated, only a single direction
appears along the left-hand side of the display. Highlight
and select it and pick one of the directions.
AILE100% AILE100%
L-D ELEV 40%
RUDD 40% RUDD 40%
AILE100% AILE100%
L-U ELEV 40%
RUDD 40% RUDD 40%