Data Reset - Reset The Model - JR X9303 2.4 Instruction And Programming Manual

Data Reset – RESET THE MODEL
When setting up a new model it is important to reset
all parameters to their default or factory settings before
proceeding with any other programming. This is to ensure
that there are no program mixes, trims or other surprises
left over from a previous model or programming session.
1. In the SYSTEM Menu, highlight and select MDL
Reset using the Selector.
2. Press the CLR button that is next to RES
on the display.
[MDL Reset]
LST
MODEL 3
NO
Are you sure? Y/N
YES
If you are setting up a model for the first time, you can
skip this step and move to the TYPE SELECT function.
HELI
3. Press the lowermost button next to YES on the display
to reset all data for this model.
4. Return to the SYSTEM Menu by pressing the
LIST button.
H-5