Bde Software Updating Tool; When Updating Comm Unit - Furuno Felcom 250 Service Manual

12.3 BDE Software Updating Tool

12.3.1 The Software Tool Screen while the Updating Procedure
is in Process

1. When updating Comm unit

When updating has started (while in maintenance mode), all LEDs will be blinking at
the interval of 1 second excluding the POWER LED for the Communication unit. When
all software for "Comm unit" is to be updated, it will take approx. 10 minutes to
complete.
MAINT: Waiting for
maintenance mode
Write the software for the
Modem.
12-16
12.3 BDE Software Updating Tool
If HUB CPU is detected,
the IP address for the HUB
CPU will be displayed.
Forward the software file for
the Modem.
Forward the software
file for the Hub.