Furuno Felcom 250 Service Manual page 406

4. INTERFACE
4.1 Ethernet
4.2 Analog telephone/telefax 4 ports: RJ-11 (2), Phoenix connector 4P (2)
4.3 RS-232C
4.4 Output alarm
4.5 Navigation data input
4.6 L-band output
4.7 SIM card slot
5. POWER SUPPLY
5.1 Communication unit
5.2 Handset
5.3 Incoming indicator
5.4 AC/DC power supply unit (PR-240, option)
6. ENVIRONMENTAL CONDITION
6.1 Ambient temperature
Exposed equipment:
Protected equipment:
6.2 Relative humidity
6.3 Degree of protection
Antenna unit
Communication unit
Handset
Incoming indicator
6.4 Vibration
6.5 Motion
7. UNIT COLOR
7.1 Antenna unit
7.2 Communication unit
7.3 Handset/ cradle
7.4 Incoming indicator
4 ports: RJ-45, 10base-T or 100base-TX,
PSE class 0 (power supply: 30 W max.)
1 port: Dsub-9P
1 port: contact closure (normal close),
Phoenix connector 2P
1 port: IEC61162-1, Phoenix connector 5P
1 port: BNC
1
12-24 VDC: 9.2-4.6 A (TX), 2.0-1.0A (RX)
PD class 2, 5 W or less
PD class 1, 2 W or less
100-115/200-240 VAC, 1 phase, 50/60Hz
-25°C to +55°C (storage: -35°C to +70°C)
-25°C to +55°C
95% at 40°C
IP56
IPX0
IP22 (cradle: IPX0)
IPX0
IEC 60945
Roll: ±30°/8s, Pitch: ±10°/6s, Yaw: ±8°/50s,
Rotation: 6°/s, Speed: 30kt
N9.5
N2.5
N2.5
N2.5
AP3-2
Appendix 3. Specifications