Initializing The Incoming Indicator; Reboot The Software; Reset The Hardware - Furuno Felcom 250 Service Manual

10.9.3 Initializing the Incoming indicator

1. Reboot the software

You will be able to reboot the software by following the operations described below. There
is no method to initialize the volume setting.
Operations)
If you keep on pressing both the [▼] and [▲] buttons for 5 seconds, a "peep" sound
will be made, and the software will start being rebooted.

2. Reset the hardware

You can initialize the settings and reboot the software by following the operations
described below.
The initialization process will initialize the volume setting.
Operations)
If you keep on pressing the [▼] and [▲] buttons and the [ACK] button for 5 seconds, a
"peep" sound will be made, and when the sound is stopped, the software will start being
initialized and rebooted.
10-47
10.9 Initializing