Handling The Password; List Of Passwords - Furuno Felcom 250 Service Manual

2.4 Handling the Password

2.4.1 List of Passwords

Applied for;
Calling Administrator's
mode from the Web MMI
(Administrator)
Calling Service mode
from the Web MMI
(Service)
SIM: PIN 1 Code
SIM: PUK1 Code
SMS menu
Settings -> PBX
settings -> Extension ->
Add extension, and Edit
Settings -> WAN ->
Add connection, and Edit
User Name
/Password
(Default)
User name: The password alone can be changed : Settings -> Change password
Admin The menus of "Settings", "Log", "Device", and "Self test" are
Password: added to the existing Navigation bar area menu of Main, SMS,
01234567 Contacts, and SIM.
User name:
This cannot be changed.
Service
"Service" menu is added to the Navigation bar area menu
Password:
described above.
fb5963
This can be changed from the Web MMI: SIM-> Change PIN
If you set Enable for SIM -> Pin Enable/Disable, you will be
Described
required to input the PIN code when the power is turned on for
upon the SIM
either the Web MMI or the Handset.
card
You will not be requested for the PIN code if you set this to
"Disable".
This cannot be changed.
When you have failed to enter the correct PIN code upon the Web
Described
MMI or upon the Handset for consecutive 3 times, enter the PUK1
upon the SIM
code.
card
You will be locked out if you fail to enter the PUK code for
consecutive 10 times.
This can be changed upon the Web MMI: Setting -> SMS server
setting
1. When you have placed a tick for [Save password] when you
have opened the SMS menu upon the Web MMI, you will not
be requested for the password to be entered from next time
01234567 you open the SMS menu.
2. When you have placed a tick for [Save password] when you
have opened the SMS menu upon the Handset, you will not
be requested for the password to be entered from next time
you open the SMS menu.
Note) The password is the same for other PCs or the Handsets.
This can be changed.
Set a password consisted of 1 - 8 characters for each Handset.
⎯
You will need to register the same password to the Handset, too.
This can be changed.
Whether you enter the password is optional. You can register the
Operation Passwords consisted of 8 characters at maximum for
each of the services and application for Standard IP Data and
⎯
each Streaming IP Data.
Once you register the passwords, you will be requested to enter
the password every time you connect and disconnect from the
service.
Note) The passwords are common between the PCs and Handsets.
** Upon the Handset: Settings -> SIP -> Client set **
2-12
2.4 Handling the Password
Table 2.4.1 List of passwords
Notes