Setup Example - Furuno Felcom 250 Service Manual

4.4.2 Setup Example

Setup example-1)
When a call is received by the phone of the phone number 870 77xxxxxxx (4k AMBE),
the status of No.1 Analog phone and No. 1 Handset is changed to "Ringing," and if
there is no response from both, the call is forwarded to No. 2 Analog phone and No. 2
Handset. However, the setting to keep the status of No. 1 Analog phone "Ringing"
until the call is terminated is;
870 77xxxxxxx -> No. 1 Analog TEL, No. 1 Handset (Ringing for x seconds)
-> Automatic forwarding: No. 1 Analog TEL, No. 2 Analog TEL, No. 2 Handset
Terminal
Terminal
number
1000 No.1 Analog TEL
1001 No.2 Analog TEL
2000 No.1 Handset
2001 No.2 Handset
3000 FAX
Setup example-2)
The setting for receiving the call at FAX number: 870 78yyyyyyy (3.1k Audio: 64 kbps)
and the setting to keep the FAX "Ringing" is;
870 78yyyyyyy -> FAX
Terminal
Terminal
number
1000 No.1 Analog TEL
1001 No.2 Analog TEL
2000 No.1 Handset
2001 No.2 Handset
3000 FAX
Incoming routing setting
Voice
Receive call by AMBE:
870 77xxxxxxx
st nd
1 ring 2 ring
Incoming routing setting
Voice
Receive call by AMBE:
870 77xxxxxxx
st nd
1 ring 2 ring
4-22
4.4 Setting for the Incoming Routing
FAX
3.1k Audio: Call received by
870 78yyyyyyy
st
1 ring
FAX
3.1k Audio: Call received by
870 78yyyyyyy
st
1 ring
nd
2 ring
nd
2 ring