Web Mmi: Registering In The Sip Server - Furuno Felcom 250 Service Manual

4.3.2 Web MMI: Registering in the SIP Server (Mandatory)
Step-2) Settings -> PBX Settings -> Extension
You will need to register the extension numbers and the passwords for the Handsets in
the SIP server from the Web MMI. You can register 30 sets.
The same extention numbers and passwords will need to be registered in the Handsets,
too. If the SIP server can acknowledge (authenticate) the Handset registered from the
Web MMI, phone calls, SMS, PS connection, and extension calls will be available.
Even if the Handsets are not authenticated, PS connection, and Handset operations/
setting are available.
Procedure)
1. When you intend to have several Handsets equipped, it is recommended that you
create a registration list as shown below in advance.
Optional item:
Register the extension line group call
number upon the Web MMI.
Numbers between 1000 – 9999 are
valid and a Group name is to be set
with up to 50 characters.
Web/HS: Web/HS:
Number Password
1000 1000
1001 1001
2000 2000
2001 abcdefgh
Mandatory item:
Same between
Mandatory item:
the Web MMI and
Same between
the Handset.
the Web MMI
Register 1-8
and the
characters.
Handset.
Register a
4-digit number.
Table 4.3.2 An example of a registration list
Web: Group
Web: Note/
HS: Nickname
No.
WH1 1111
WH2 1111
CCR
CAPTAIN
Optional item:
This can be different between the
Web MMI and the Handset. 50
characters at maximum.
Management will be easier if you
register some characters.
4-12
4.3 Registering the Handset in the SIP Server
Web:
Call
nd
limit
Name 2
WH No limit
WH Incoming
only
No limit
No limit
Optional item:
The default value for the
limitations for making
calls is No limit.
Web: Incoming
Routing
Rings after (30 )s..
1
2
1
1
Optional item:
The order of incoming
calls and the delayed
ringing time: to be set
within the range of 0-99
sec; default value is 30
sec. If 0 sec. is set, this
nd
means that the 2 Ring is
OFF