Have The Web Mmi For Felcom-250/500 Displayed; Overview - Furuno Felcom 250 Service Manual

1.3 Have the Web MMI for FELCOM-250/500 Displayed

1.3.1 Overview

You can execute setups, maintenance, and connection/disconnection of Standard IP data
or Streaming IP data upon the Web MMI for FELCOM-250/500. In order to establish
communication, you will need to establish LAN connection the PC and the
Communication unit, and to have a SIM card inserted into the SIM card slot of the
Communication unit.
To have the Web MMI displayed, activate Internet Explorer (IE), and enter the "Own IP
address: 192.168.1.1" set for FELCOM-250/500 into the URL field.
Enter the URL into the IE screen
for FELCOM-250/500, and then a
screen to enter the PIN code will
be displayed.
FELCOM-250/500 is equipped of the DHCP and DNS server functions, and can
automatically allocate IP addresses to network terminals such as the Handsets or
Incoming indicators where LAN connection is established.
Usually, it is desirable to have an IP address automatically allocated using the DHCP
function.
In this case, it is recommended to make the setting of; Settings -> Network settings ->
LAN -> IP address -> DHCP server to "Use", and then to select "Case 1) Automatically
acquire IP address".
When you have selected "Unuse", select "Case 2) Use the following IP address", and
specify the IP address to make the setting for the PC.
Own IP address of the Communication unit
IP address
Subnet mask : 255.255.255.0
DNS server address set to PC
IP address
1.3 Have the Web MMI for FELCOM-250/500 Displayed
: 192.168.1.1 (the IP address for ComHUB of the
Communication unit)
: 192.168.1.1 (the IP address for ComHUB of the
Communication unit)
1-16
Web MMI for
FELCOM-250/500