Furuno Felcom 250 Service Manual page 104

Step 4) Handling the Web MMI
The Web MMI is equipped with the User mode, the Administrator's mode where
settings can be made, and the Service mode where settings can be made and
maintenance works can be executed. When the screen is set to each of these modes, the
menus corresponding to each mode will be added to the menus displayed upon the
Navigation bar area menu.
How to set the Web MMI to Administrator's mode
If you click [admin login] upon the Web MMI, the screen [Administrator login] will
be displayed; enter the following into the screen.
Username
Password
How to set the Web MMI to Service mode
If you click [admin login] upon the Web MMI, the screen [Administrator login] will
be displayed; enter the following into the screen.
Username
Password
User screen
1.3 Have the Web MMI for FELCOM-250/500 Displayed
: Admin
: 01234567 (this password can be changed)
: Service
: fb5963 (not changed)
Click [admin login]
1-20
Menu added