When Updating The Handset - Furuno Felcom 250 Service Manual

2. When Updating the Handset

The data is forwarded sequentially to the connected
Handset, and then each Handset starts the updating
process. Once the updating process is started, the
Handset screen will be turned off, and then will be
switched to the following screen. When the updating
process is completed, the normal screen will be
activated.
When all software for the Handset is updated, it will
take approx. 6 minutes to complete.
MAINT: Waiting for
maintenance mode
Write the software for the Handset.
Waiting: Reboot Handset
12-19
12.3 BDE Software Updating Tool
The Handset screen display
while the updating procedure
is in process
The IP address for the
detected Handset will
be displayed.
Forward the software file for
the Handset.