Table of Contents
Advertisement
more information, refer to the Port Channel chapter in the Dell Networking OS
Configuration Guide.
Related
group
Command
show interfaces port-channel
groups.
show config
Display the current configuration of the selected LAG.
Syntax
show config
Command
INTERFACE PORTCHANNEL
Modes
Command
Version 8.3.16.1
History
Example
Dell(conf-if-po-1)#show config
!
interface Port-channel 1
Dell(conf-if-po-1)#
show interfaces port-channel
Display information on configured Port Channel groups.
Syntax
show interfaces port-channel [channel-number] [brief]
Parameters
channel-
number
brief
Command
•
Modes
•
Command
Version 8.3.16.1
History
604
— groups two LAGs in a supergroup ("fate-sharing group").
Introduced on the MXL 10/40GbE Switch IO Module.
no ip address
shutdown
For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
(OPTIONAL) Enter the keyword brief to display only the
port channel number, the state of the port channel, and the
number of interfaces in the port channel.
EXEC
EXEC Privilege
Introduced on the S4820T.
— displays information on configured Port Channel
Interfaces
Advertisement
Table of Contents
