Dell MXL 10GbE Reference Manual page 404

qos | vman-qos—dual— number | vman-qos—dual—fp number] ipv4pbr
number} ecfmacl number fcoeacl number iscsioptacl number}
Parameters
default
l2acl number
ipv4acl number
ipv6acl number
ipv4qos
number
l2qos number
l2pt number
Ipmacacl
number
ecfmacl
number
Vman-qos|
vman-dual-qos
number
vman-dual-qos
number
Ipv4pbr
number
Openflow
number
404
Use the default CAM profile settings and set the CAM as
follows:
• L3 ACL (ipv4acl): 4
• L2 ACL(l2acl): 5
• IPv6 L3 ACL (ipv6acl): 0
• L3 QoS (ipv4qos): 1
• L2 QoS (l2qos): 1
• L2PT (L2PT): 0
• MAC ACL (IpMacAcl): 0
• VmanDualQos: 0
• EcfmAcl: 0
• FcoeAcl: 4
• iscsiOptAcl: 2
Enter the keyword l2acl and then the number of l2acl
blocks. The range is from 1 to 8.
Enter the keyword ipv4acl and then the number of FP
blocks for IPv4. The range is from 0 to 8.
Enter the keyword ipv6acl and then the number of FP
blocks for IPv6. The range is from 0 to 4.
Enter the keyword ipv4qos and then the number of FP
blocks for IPv4. The range is from 0 to 8.
Enter the keyword l2qos and then the number of FP blocks
for l2 qos. The range is from 1to 8.
Enter the keyword l2pt and then the number of FP blocks
for l2 protocol tunnelling. The range is from 0 to 1.
Enter the keyword ipmacacl and then the number of FP
blocks for IP and MAC ACL. The range is from 0 to 6.
Enter the keyword ecfmacacl and then the number of FP
blocks for ECFM ACL. The range is from 0 to 5.
Enter the keyword evman-qos and then the number of FP
blocks for VMAN QoS. The range is from 0 to 6.
Enter the keyword vman-dual-qos and then the number of
FP blocks for VMAN dual QoS. The range is from 0 to 4.
Enter the keyword ipv4pbr and then the number of FP
blocks for ipv4pbr ACL. The range is from 0 to 8.
Enter the keyword openflow and then the number of FP
blocks for open flow (multiples of 4). The range is from 0 to
8.
Content Addressable Memory (CAM)