Dell MXL 10GbE Reference Manual page 386

summary
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
The following describes the show ip bgp peer-group command shown in the
Information
following example.
Line beginning
with:
Peer-group
Administratively
shut
BGP version
Minimum time
For address family
BGP neighbor
Number of peers
Peer-group
members:
Example
Dell#show ip bgp peer-group
(S4810 S4820T)
Peer-group pg1
Number of peers in this group 4
386
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in the show ip bgp summary
command.
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Description
Displays the peer group's name.
Displays the peer group's status if the peer group is not
enabled. If you enable the peer group, this line is not
displayed.
Displays the BGP version supported.
Displays the time interval between BGP advertisements.
Displays IPv4 Unicast as the address family.
Displays the name of the BGP neighbor.
Displays the number of peers currently configured for this
peer group.
Lists the IP addresses of the peers in the peer group. If the
address is outbound optimized, an * is displayed next to the
IP address.
BGP version 4
Minimum time between advertisement runs is 30 seconds
For address family: IPv4 Unicast
BGP neighbor is pg1
Update packing has 4_OCTECT_AS support enabled
Add-path support enabled
Peer-group members (* - outbound optimized):
1.1.1.5
1.1.1.6
10.10.10.2*
20.20.20.100
Border Gateway Protocol IPv4 (BGPv4)