Dell MXL 10GbE Reference Manual page 240

Switch i/o module
Table of Contents

Advertisement

address-mask | any} [count [byte]] [order] [log
[intervalminutes][threshold-in-msgs] [count]][monitor]
To remove this filter, you have two choices:
Parameters
protocol-type-
number
destination-
mac-address
mac-address-
mask
any
vlan vlan-id
source-mac-
address mac-
address-mask
count
byte
order
240
Use the no seq sequence-number command if you know the filter's
sequence number.
Use the no permit ether-type protocol-type-number
{destination-mac-address mac-address-mask | any} vlan vlan-
id {source-mac-address mac-address-mask | any} command.
Enter a number from 600 to FFF as the specific Ethernet type
traffic to drop.
Enter a MAC address and mask in the nn:nn:nn:nn:nn format.
For the MAC address mask, specify which bits in the MAC
address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
Enter the keyword any to match and drop specific Ethernet
traffic on the interface.
Enter the keyword vlan and then enter the VLAN ID to filter
traffic associated with a specific VLAN. The range is 1 to
4094 and 1 to 2094 for ExaScale (you can use IDs 1 to 4094).
To filter all VLAN traffic specify VLAN 1.
Enter a MAC address and mask in the nn:nn:nn:nn:nn format.
For the MAC address mask, specify which bits in the MAC
address must match.
The MAC ACL supports an inverse mask; therefore, a mask of
ff:ff:ff:ff:ff:ff allows entries that do not match and a mask of
00:00:00:00:00:00 only allows entries that match exactly.
(OPTIONAL) Enter the keyword count to count packets
processed by the filter.
(OPTIONAL) Enter the keyword byte to count bytes
processed by the filter.
(OPTIONAL) Enter the keyword order to specify the QoS
priority for the ACL entry. The range is 0 to 254 (where 0 is
the highest priority and 254 is the lowest; lower order
numbers have a higher priority). If you do not use the
keyword order, the ACLs have the lowest order by default
(255).
Access Control Lists (ACL)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mxl 40gbe

Table of Contents