Dell MXL 10GbE Reference Manual page 122

Parameters
host
ip-address
Defaults
•
•
•
•
•
Command
•
Modes
•
Command
Version 8.3.16.1
History
Usage When you enter the traceroute command without specifying an IP address
Information
(Extended Traceroute), you are prompted for a target and source IP address,
timeout (in seconds) (default is 5), a probe count (default is 3), minimum TTL
(default is 1), maximum TTL (default is 30), and port number (default is 33434). To
keep the default setting for those parameters, press the ENTER key.
Example (IPv4)
Dell#traceroute www.force10networks.com
Translating "www.force10networks.com"...domain server
(10.11.0.1) [OK]
Type Ctrl-C to abort.
-----------------------------------------------
Tracing the route to www.force10networks.com (10.11.84.18),
30 hops max, 40 byte packets
-----------------------------------------------
TTL Hostname
1
2
ms 001.000 ms 001.000 ms
3
000.000 ms 000.000 ms
4
ms 000.000 ms
Dell#
Related ping
Commands
122
Enter the name of device.
Enter the IP address of the device in dotted decimal format.
Timeout = 5 seconds
Probe count = 3
30 hops max
40 byte packet size
UDP port = 33434
EXEC
EXEC Privilege
Introduced on the MXL 10/40GbE Switch IO Module.
Probe1
10.11.199.190 001.000 ms 001.000 ms 002.000 ms
gwegress-sjc-02.force10networks.com (10.11.30.126) 005.000
fw-sjc-01.force10networks.com (10.11.127.254) 000.000 ms
www.force10networks.com (10.11.84.18) 000.000 ms 000.000
— tests the connectivity to a device.
Probe2 Probe3
Control and Monitoring