Dell MXL 10GbE Reference Manual page 378

The Lines
Beginning with:
BGP version
BGP state
Last read
Received
messages
Sent messages
Received updates
Soft
reconfiguration
Minimum time
(list of inbound
and outbound
policies)
For address
family:
BGP table version
accepted prefixes
Prefix advertised
Connections
established
378
Description
Displays the BGP version (always version 4) and the remote
router ID.
Displays the neighbor's BGP state and the amount of time in
hours:minutes:seconds it has been in that state.
This line displays the following information:
• last read is the time (hours:minutes:seconds) the router
read a message from its neighbor
• hold time is the number of seconds configured between
messages from its neighbor
• keepalive interval is the number of seconds between
keepalive messages to help ensure that the TCP session
is still alive.
This line displays the number of BGP messages received, the
number of notifications (error messages), and the number of
messages waiting in a queue for processing.
The line displays the number of BGP messages sent, the
number of notifications (error messages), and the number of
messages waiting in a queue for processing.
This line displays the number of BGP updates received and
sent.
This line indicates that soft reconfiguration inbound is
configured.
Displays the minimum time, in seconds, between
advertisements.
Displays the policy commands configured and the names of
the Route map, AS-PATH ACL, or Prefix list configured for
the policy.
Displays the IPv4 Unicast as the address family.
Displays which version of the primary BGP routing table the
router and the neighbor are using.
Displays the number of network prefixes the router accepts
and the amount of memory used to process those prefixes.
Displays the number of network prefixes advertised, the
number rejected, and the number withdrawn from the BGP
routing table.
Displays the number of TCP connections established and
dropped between the two peers to exchange BGP
information.
Border Gateway Protocol IPv4 (BGPv4)