Dell MXL 10GbE Reference Manual page 137

Command
Version 9.2(0.0)
History
Usage
If you enable 802.1X multi-supplicant authentication on a port, additional 802.1X
Information
configuration details (Port Authentication status, Untagged VLAN ID, Authentication
PAE state, and Backend state) are displayed for each supplicant, as shown in the
following example.
Example
Dell#show dot1x interface fortyGigE 0/48
802.1x information on Fo 0/48:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Guest VLAN:
Guest VLAN id:
Auth-Fail VLAN:
Auth-Fail VLAN id:
Auth-Fail Max-Attempts:
Mac-Auth-Bypass:
Mac-Auth-Bypass Only:
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Host Mode:
Auth PAE State:
Backend State:
Dell#
Dell#show dot1x interface tengigabitethernet 0/32
802.1x information on Te 0/32:
-----------------------------
Dot1x Status:
Port Control:
Port Auth Status:
Re-Authentication:
Untagged VLAN id:
Guest VLAN:
Guest VLAN id:
Auth-Fail VLAN:
Auth-Fail VLAN id:
Auth-Fail Max-Attempts:
Mac-Auth-Bypass:
Mac-Auth-Bypass Only:
Tx Period:
Quiet Period:
ReAuth Max:
Supplicant Timeout:
Server Timeout:
Re-Auth Interval:
Max-EAP-Req:
Host Mode:
Auth PAE State:
802.1X
Introduced on the MXL 10/40GbE Switch IO Module.
Enable
AUTO
UNAUTHORIZED
Disable
None
Disable
NONE
Disable
NONE
NONE
Disable
Disable
30 seconds
60 seconds
2
30 seconds
30 seconds
3600 seconds
2
SINGLE_HOST
Initialize
Initialize
Enable
AUTO
AUTHORIZED(MAC-AUTH-BYPASS)
Disable
400
Enable
100
Disable
NONE
NONE
Enable
Enable
3 seconds
60 seconds
2
30 seconds
30 seconds
3600 seconds
2
SINGLE_HOST
Authenticated
137