Dell MXL 10GbE Reference Manual page 181

To delete a MAC access-group, use the no mac access-group mac-list-
name command.
Parameters
access-list-
name
vlan vlan-range
in
out
Defaults none
Command INTERFACE
Modes
Command
Version 8.3.16.1
History
Usage You can assign one ACL (standard or extended) to an interface.
Information
In case of applying a MAC ACL to traffic entering or exiting a VLAN interface. Enter
the VLAN interface mode and apply the mac acl in the following manner.
mac access-group access-list-name {in | out}
1.
2.
3.
4.
Related
mac access-list standard
Commands
mac access-list extended
Access Control Lists (ACL)
Enter the name of a configured MAC access list, up to 140
characters.
(OPTIONAL) Enter the keyword vlan and then enter a range
of VLANs. The range is from 1 to 4094 (you can use IDs 1 to
4094).
NOTE: This option is available only with the keywordin
option.
Enter the keyword in to configure the ACL to filter incoming
traffic.
Enter the keyword out to configure the ACL to filter
outgoing traffic.
Introduced on the MXL 10/40GbE Switch IO Module.
If the MAC ACL is applied on VLAN, none of the VLAN members should have
an access list applied for that VLAN.
If the MAC ACL is applied on a Physical or Port Channel interface, the VLAN in
which this port is associated should not have an access list applied.
If the MAC ACL is applied on a VLAN, then that VLAN should not belong to
VLAN ACL group.
If the MAC ACL is applied on a VLAN ACL group, then none of the VLANs in
that group should have an access list applied on it.
— configures a standard MAC ACL.
— configures an extended MAC ACL.
181