To return to the default, use the no distribute-list redistributed-
override in command.
Defaults
none
Command
•
Modes
•
Command
Version 9.2(0.0)
History
Usage
When you execute this command, IS-IS does not download the route to the
Information
routing table if the same route was redistributed into IS-IS routing protocol on the
same router.
domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5
encryption-
type
password
Defaults
No default password.
Command
ROUTER ISIS
Modes
Command
Version 9.2(0.0)
History
Usage
The domain password is inserted in Level 2 link state PDUs (LSPs), complete
Information
sequence number PDUs (CSNPs), and partial sequence number PDUs (PSNPs).
Related
•
Commands
•
Intermediate System to Intermediate System (IS-IS)
ROUTER ISIS (for IPv4)
CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6)
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
(OPTIONAL) Enter 7 to encrypt the password using DES.
Enter an alphanumeric string up to 16 characters long. If you
do not specify an encryption type or hmac-md5
keywords, the password is processed as plain text which
provides limited security.
Introduced on the MXL 10/40GbE Switch IO Module.
area-password
— configures an IS-IS area authentication password.
isis priority
— configures the authentication password for an interface.
803