Debug Ip Bgp Updates - Dell MXL 10GbE Reference Manual

Command
Version 9.2(0.0)
History
Usage
Entering a no debug ip bgp command removes all configured debug
Information
commands for BGP.

debug ip bgp updates

Allows you to view information about BGP updates.
Syntax
debug ip bgp [ipv6-address | peer-group peer-group-name | ipv6
unicast [ipv6-address]] updates [in | out | prefix-list prefix-
list-name]
To disable debugging, use the no debug ip bgp [ip-address | peer-group
peer-group-name | ipv6 unicast [ipv6-address]] updates [in |
out] command.
Parameters
ipv6-address
peer-group
peer-group-
name
ipv6 unicast
[ipv6-address]
in
out
Command EXEC Privilege
Modes
Command
Version 9.2(0.0)
History
Usage
Entering a no debug ip bgp command removes all configured debug
Information
commands for BGP.
718
Introduced on the MXL 10/40GbE Switch IO Module.
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
(OPTIONAL) Enter the keywords peer-group then the name
of the peer group.
(OPTIONAL) Enter the keywords ipv6 unicast, and,
optionally, an ipv6 address.
(OPTIONAL) Enter the keyword in to view only BGP updates
received from neighbors.
(OPTIONAL) Enter the keyword out to view only BGP
updates sent to neighbors.
Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP)