dynamic
packets-
pointers
queue0
number
queue1 number
queue2
number
queue3
number
Defaults
none
Command
BUFFER PROFILE
Modes
Command
Version 8.3.16.1
History
Related
buffer-profile (Configuration)
Commands
interface.
Debugging and Diagnostics
Enter the keyword dynamic to configure the amount of
dynamic buffer space per Field Processor.
Enter the keywords packets-pointers to configure the
number of packet pointers per queue.
Enter the keyword queue0 and the number to allocate an
amount of buffer space or packet pointers to Queue 0.
•
Dedicated Buffer Range: 0 to 2013.
•
Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
•
Packet Pointer Range: 0 to 2047.
Enter the keyword queue1 and the number to allocate an
amount of buffer space or packet pointers to Queue 1.
•
Dedicated Buffer Range: 0 to 2013.
•
Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
•
Packet Pointer Range: 0 to 2047.
Enter the keyword queue2 and the number to allocate an
amount of buffer space or packet pointers to Queue 2.
•
Dedicated Buffer Range: 0 to 2013.
•
Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
•
Packet Pointer Range: 0 to 2047.
Enter the keyword queue3 and the number to allocate an
amount of buffer space or packet pointers to Queue 3.
•
Dedicated Buffer Range: 0 to 2013.
•
Dynamic Buffer Range: FP: 0 to 2013. CSF: 0 to 131200
(in multiples of 80).
•
Packet Pointer Range: 0 to 2047.
Introduced on the MXL 10/40GbE Switch IO Module.
— creates a buffer profile that can be applied to an
467