Service-Class Dot1P-Mapping - Dell MXL 10GbE Reference Manual

service-class dot1p-mapping

This command maps an 802.1p priority to an internal traffic class.
Syntax
service-class dot1p-mapping user-priority
Parameters
user-priority
Command CONFIGURATION
Modes
Command
Version 8.3.16.1
History
Per-Port QoS Commands
Per-port QoS (port-based QoS) allows you to define the QoS configuration on a per-physical-port basis.
dot1p-priority
Assign a value to the IEEE 802.1p bits on the traffic this interface receives.
Syntax
dot1p-priority priority-value
To delete the IEEE 802.1p configuration on the interface, use the no dot1p-
priority command.
Parameters
priority-value
Defaults none
Quality of Service (QoS)
The user-priority value ranges from 0 to 7.
Introduced on the MXL 10/40GbE Switch IO Module.
Enter a value from 0 to 7.
dot1p Queue Number
0 0
1 0
2 0
3 1
4 2
5 3
6 3
7 3
1073