11-3. Download function of parameters (CPY2)
All setting values of function parameters of the main unit are changed to the setting values of built-in
memory parameters inside the connected operation panel. After data value is set to "dOL", all download
will be activated.
•¡ Download method of built-in memory parameters
STOP
Press the STOP button to stop the inverter.
MODE
Press the MODE button.
MODE
Press the MODE button.
Press the MODE button.
MODE
Press the MODE button.
MODE
(If a password is set, it's necessary to input
the password. Refer to page 139.)
MODE
Press the MODE button.
Press the UP•EDOWN button and the show
value is set to "CPY2"
Press the SET button.
SET
(Current setting value is displayed.)
Press the UP button and the displayed value
is set to "dOL.
Press the SET button to start the download.
SET
The download indication will flicker.
¡úWhen the download ends, "End" will be displayed.
SET
Press the SET button. (Increment in CPY3)
[Continued to next page]
149