Explanation Of Operation Panel - Panasonic VF100 Instruction Manual

5-5. Explanation of Operation Panel

FWD display
REV display
MODE button
Frequency
setting dial
SET button
Name of Each Part
Main display
FWD display (green)
REV display (green)
Alarm display (red)
RUN button
STOP button
MODE button
SET button
¡ø(UP) button
¨‹(DOWN) button
Frequency setting dial
MODE
SET
MAX.
MIN.
The output frequency, current, line speed, setting frequency,
communication station No., error details, each mode display
and data for function setting are displayed.
Forward run is displayed (During operation at constant speed: Lamp
will turn ON; During acceleration/deceleration operation: flicker).
Reverse run is displayed (During operation at constant speed:
Lamp will turn ON; During acceleration/deceleration operation:
flicker).
Errors and alarm are displayed.
(Refer to P147: Alarm LED operation selection)
The switch is used to start the inverter.
The switch is used to stop the inverter.
This switch is used to change to each "operation status display",
"frequency setting, monitor", "rotation direction setting", "control
status monitor", "custom", "function setting", and "built-in memory
setting" mode, and to switch the display from the data to mode
display.
The switch is used to change the display between the mode and
data display, and to save the data. In the "operation status display
mode", this switch changes the display between the frequency
and current.
This switch is used to change the data and output frequency, and
to set forward run direction when carrying out forward rotation
with the operation panel.
This switch is used to change the data and output frequency, and
to set reverse run direction when carrying out reverse rotation
with the operation panel.
This is the dial for the potentiometer used to set the operating
frequency with operation panel.
RUN
STOP
Description of Functions
Main display
Alarm display
(ALM)
¡ø(UP) button
RUN button
STOP button
¡ø(DOWN) button
19