P107: Proportional Gain [Kp]; P108: Integral Time [Ti]; P109: Derivative Time [Td]; P110: Control Cycle [Ts]/P111: Pid Target Value - Panasonic VF100 Instruction Manual

P107£ºProportional gain [Kp]
P108£ºIntegral time [Ti]
P109£ºDerivative time [Td]
P110£ºControl cycle [Ts]
P111£ºPID target value
Used to set proportional gain, integral time, derivative time, control cycle and PID target value
required in PID control.
•E Parameter P107~109 settings are used as parameter of PID control.
•E Parameter P110 setting performs cycle under PID control.
•E When Parameter P004 = "1" or "7", setting value (SP) is set with parameter P111.
[Parameter P107: Proportional gain (Kp)]
Data setting range
[Parameter P108: Integral time (Ti)]
Data setting range (s)
* "0000" is setting that the integral control is to
be disabled.
[Parameter P109: Derivative time (Td)]
Data setting range (s)
* "0000" is setting that the derivative control is
to be disabled.
•EPID control select
•EInput signal select of measured value (PV)
•EBias/gain setting for measured value (PV)
•ESetting signal select of setting value (SP)
Related
•EBias/gain setting for setting value (SP)
parameters
•EUpper/lower clamp setting for output frequency
•EPID control changeover input setting
0.1 to 1000
0000•E0.1 to 3600
0000•E0.1 to 3600
[Parameter P110: Control cycle (Ts)]
Data setting range (s)
[Parameter P111: PID target value]
Data setting range (%)
•Ë " P124: Analog input function select 2"
•Ë "P125: Analog input signal select 2"
•Ë "P126: Bias frequency setting 2"
"P127: Gain frequency setting 2"
•Ë "P004: Frequency setting signal"
•Ë "P102: Bias/gain function select"
"P103: Bias frequency setting"
"P104: Gain frequency setting"
•Ë "P099: Lower/upper frequency clamp",
"P100: Lower/upper frequency clamp"
•Ë "P036~040: SW1~5 function select"
0.01 to 60.0
0.0•E0.1 to 100.0
115