9-1.2 Setting And Changing Function Parameters During Operation - Panasonic VF100 Instruction Manual

9-1.2 Setting and Changing Function Parameters during Operation

The motor and motor load fluctuation could change significantly and
!
Caution:
the motor may suddenly start or stop when data is being changed
during operation.
(Before making changes, ensure personal safety at all times. )
Failure to do so could lead to injury.
Under item "Changeable in Operation" in "9-2 Function Parameter Table", the ¡ð mark
indicates parameters that can be changed during operation.
[Setting example: Change change 1
(Changing the parameter P002 data from "5.0" to "10.0")
Control
motor with
current data
[Continued to next page]
st
deceleration time from 5.0s to 10.0s.]
Operation state (for 50.0Hz operation)
Press the MODE button.
MODE
Press the MODE button.
MODE
Press the MODE button.
MODE
Press the MODE button.
MODE
Press the MODE button, and enter
the "function setting mode."
(If a password is set, it must
MODE
be entered at this point. Refer
to page 139.)
Press the UP button once,
and change the parameter
No. to P002.
Press the SET button to display
the parameter P002 data.
SET
(The main display will flicker.)
.
55