Panasonic VF100 Instruction Manual page 46

Note
•EExcept the digital setting in the frequency setting mode (P004: frequency signal
setting = 1), command frequency of parameter P004 is displayed.
•EExcept operating method of the rotation direction setting mode in the rotation direction
setting mode (P003: run command select =0), setting cannot be changed only
through monitoring.
When the password is to be set (parameter P150), "PS" will be displayed after the
control state monitor mode. If the set password is not input, no custom mode, function
setting mode and built-in memory setting mode will be displayed.(Refer to page139)
•EBuilt-in memory setting mode can be set to display or undisplay. (Refer to page 152)
When built-in memory setting mode is set to undisplay, it will change from function
setting mode to operation status display mode.
45