Safe Installation; Wiring - Panasonic VF100 Instruction Manual

1. Installation
Install the unit on a non-combustible material such as metal.
Installing it on other material could lead to fires.
Do not place the unit near flammable materials.
Doing so could lead to fires.
Do not hold by terminal cover during transportation.
Doing so could cause the unit to drop and lead to injuries.
Do not allow foreign matter such as metal swarf enter the unit.
Entry of this type of matter could lead to fires.
Install the unit according to the instruction manual on a place where
the weight can be withstood.
Failure to do so could lead to dropping of the unit and to injuries.
Do not install or operate an inverter that is damaged or missing parts.
Doing so could lead to injuries.

2. Wiring

Always confirm that the power is OFF before starting wiring.
Failure to do so could lead to electric shocks or fires.
Always connect the earth.
Failure to do so could lead to electric shocks or fires.
Wiring work must be carried out by a qualified technician.
Failure to do so could lead to electric shocks or fires.
Always install the unit before wiring.
Failure to do so could lead to electric shocks or injuries.
Do not connect an AC power supply to the output terminals (U, V, W).
Doing so could lead to injuries or fire.
Confirm that the product's rated voltage and the AC power supply
voltage match.
Failure to do so could lead to injuries or fires.
Tighten the terminal screws to the designated torque.
Failure to do so could lead to fires.
2
Note
!
! Caution
Note
!