Function Of Each Mode - Panasonic VF0 Series 400V class Instruction Manual

The VF0 has the following four modes.
(1) Output frequency, current display mode, (2) Frequency setting, monitor
mode, (3) Rotation direction setting mode, (4) Function setting mode
Normally, use in the output frequency, current display mode.
This mode is entered when the power is turned ON.
(1) Output frequency, current display mode
[Output frequency display]
1. Output 2.
frequency
(line speed)
5 0. 0
MODE
(2) Frequency setting, monitor mode
The frequency can be digitally set, and the
parameter P09 frequency command can
be monitored
[Mode display]
MODE
(3) Rotation direction setting mode
The rotation direction can be set
and the control status (local/
external) can be monitored with
panel operations.
[Mode display]
MODE
(4) Function setting mode
The parameter data can be changed and
monitored in this mode.
The parameter No. is displayed when this mode
is entered.
Set the required No. with the
A password can be set in this mode.
[Parameter No. display]
[Password display]
MODE

Function of Each Mode

3. 0V stop
Operation
preparation display
completed display
0 0 0 0.
F r
SET
MODE
d r
and buttons.
P 0 1
P S
Output current display mode
SET
The output current of the inverter is
displayed.
SET
0
[Data change and monitor]
SET
Change the frequency with the
·
and buttons, and press the SET
button to set the data.
MODE
The parameter P09 command
·
frequency is displayed except
during the digital setting.
SET
[Data change]
Change the data with the
·
and press the SET button to set the data.

L F
Local –
Forward run
Note) When parameter P08 is set to "1" just with
the monitor, the settings cannot be changed.
[Data change]
The data can be changed with the
SET
and
Press the SET button, and set the
changed data. (The next parameter
SET
No. will appear when the SET button
is pressed.)
The current parameter No. will
MODE
appear when the MODE button is
pressed.
(The data is not set.)
0. 0 A
SET
and buttons,
During external

L r
control, L will
Local –
change to E.
Reverse run
buttons.
30