Example For Changing The Rotation Direction During Operation - Panasonic VF100 Instruction Manual

[Continued from previous page.]
Changing
the rotation
direction
Run command
Frequency
setting
Stop command

[Example for changing the rotation direction during operation]

Use the same procedures as "Changing the rotation direction" explained above. In this case, when the
SET button is pressed last the display will change to the "operation state display mode", the motor will
decelerate and then will start rotating in the reverse direction.
30
Press the UP button.
(The main display will flicker.)
Press the SET button to set the
SET
data. (Return to operation status
display mode)
Press the RUN button.
The run state will be entered, but
RUN
as the frequency setting dial is
set to Min., the OV stop state will
be entered.
Gradually turn the frequency setting
dial clockwise, and then motor will
start to run. When "25.0" is displayed,
the motor is operating at 25Hz.
Stopping operation
Press the STOP button.
The motor will start to decelerate
STOP
and will stop.