P105£ºAnalog input filter
Used to set filter constant of analog input terminal (control circuit terminals No.14 and No.17).
It's effective to remove external voltage or external interference of current frequency setting signal.
Data setting range (times)
•EFilter constant of analog input signal of control circuit terminals No.14 and No.17 is the same
setting value.
•EAfter setting value (average times) is increased, frequency command is stable, but the response
speed decreases.
5 to 200 (setting unit :1)
Ïà¹Ø
Related
P004, P125
²ÎÊý
parameters
113