Removing The Desktop Input Board - Barco Galaxy NH-12 Service Manual

7.8.2

Removing the desktop input board

Necessary tools
• Torx screwdriver T10
• Nut spanner 3/16"
How to remove the desktop input board?
1. Remove both fixing screws at the front panel
Image 7-106
Desktop input unit: fixing screws
2. Pull out the desktop unit until the connectors can be reached
3. Unplug the connectors:
- J320: I2C going to the PMP
- J360: power supply from the power box
- J200 and J201: data going to the LVDS interface
4. Slide out the desktop input unit
Image 7-107
Desktop input unit (rear view)
5. Disconnect the LCD module from the desktop input:
- J300: data to the LCD module
- J301: backlight to the LCD module
6. Remove the screws and bolts fixing the desktop input board to the unit
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
87