Installing The Stereo Input/Output Layer - Barco Galaxy NH-12 Service Manual

Image 7-97
stereo input/output input layer: front screws
3. Remove the side screw, fixing the stereo input/output input layer to the PMP
Image 7-98
stereo input/output input layer: side screw
4. Disconnect the board-to-board connectors to remove the stereo input/output input layer from the PMP
Image 7-99
stereo input/output input layer: unplug the board-to-board connectors to remove
7.7.4.4.3

Installing the stereo input/output layer

Necessary tools
Torx screwdriver T10
How to install the stereo input/output input layer?
1. Make the board-to-board connection between stereo input/output input layer and PMP
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
83