Installing The Pmp - Barco Galaxy NH-12 Service Manual

7. Electronic parts and servicing procedures
Image 7-126
PMP: unplug from input boards
5. Remove the LVDS connector from the PMP (see chapter LVDS interface)
Image 7-127
PMP: fixing screws of the LVDS interface
6. Remove the screws fixing the PMP fan assembly to the PMP
Image 7-128
PMP fan assembly: fixing screws (1)

7.11.4 Installing the PMP

Necessary tools
Torx screwdriver T10
How to install the PMP?
1. Put the PMP fan assembly on the PMP and fix it using 6 screws
96
Image 7-129
PMP fan assembly: fixing screws (2)
R59770141 GALAXY NH-12 20/02/2008