Electronic Parts And Servicing Procedures; Mains Input; Mains Switch - Barco Galaxy NH-12 Service Manual

7. ELECTRONIC PARTS AND SERVICING PROCEDURES

Overview
•

Mains input

• Universal 12V power box
• X-fan supply
• Lamp info receiver
• Lamp power supply (LPS)
• Start pulse generator (SPG)
• Input module
• Desktop input board
• LCD module
• LVDS interface
• Pixel map processor (PMP)
• Engine Controller
• Preformatter
• Formatter
• Motor connector board
• Lens shift safety switch
• Front IR receiver
• Local keypad / IR receiver
• Lamp temperature sensor
• Ambient temperature and pressure sensor
• CLO / LFR sensor
7.1 Mains input
Overview
•

Mains switch

• Mains filter
• Mains pulse filter
• Mains fuses
7.1.1 Mains switch
Description
The mains switch is used to switch on and switch off the projector.
Image 7-1
Mains switch
Necessary tools
Torx screwdriver T10
How to replace the mains switch?
1. Unscrew the right front foot of the projector (or remove it completely)
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
39