Dvi / D15 Input Layer - Barco Galaxy NH-12 Service Manual

Image 7-78
Analog input layer: plug in the board-to-board connectors
2. Fix the analog input layer to the PMP using a screw
Image 7-79
Analog input layer: side screw
3. Fix the input board to the front panel using three screws
Image 7-80
Analog input layer: front screws
4. Install the input module (see concerning chapter)
7.7.4.2

DVI / D15 input layer

Overview
• Description of the DVI / D15 input layer
• Removing the DVI / D15 input layer
• Installing the DVI / D15 input layer
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
75