Formatter - Barco Galaxy NH-12 Service Manual

7. Electronic parts and servicing procedures
Image 7-149
Preformatter unit: fixing screws
7. Install the covers (see concerning chapters):
- rear cover
- top cover
- engine fan cover 1

7.14 Formatter

Description of the formatter
The formatters receive their power and data signals from the preformatter. Configuration is done using the CPLD and flash on the
preformatter. Once the configuration is loaded successfully, a LED turns on green.
There are three formatters: one for the RED channel, one for the GREEN channel and one for the BLUE channel. The layout of the
green and the blue formatter is equal! The layout of the red formatter is different.
Image 7-150
Formatter: layout of blue and green channel
106
Image 7-151
Formatter: layout of red channel
R59770141 GALAXY NH-12 20/02/2008