Lamp Info Receiver - Barco Galaxy NH-12 Service Manual

Image 7-40
X-fan cover: fixing screws
4. Connect the fan X-fan to connector J404 on the X-fan supply
5. Install the covers (see concerning chapters):
- engine fan cover 2
- engine fan cover 1
- top cover
- rear cover
7.4

Lamp info receiver

Description
The lamp info receiver collects the data stored in the memory of the lamp and sends it to the PMP-CPU.
Necessary tools
• Torx screwdriver T10
• Nut spanner 5.5 mm
How to replace the lamp info receiver?
1. Remove the rear cover (see concerning chapter)
2. Remove the lamp (see concerning chapter)
3. Unplug the connectors
4. Remove both screws fixing the lamp info receiver assembly
Image 7-41
Lamp info receiver: fixing screws
5. Remove the lamp info receiver unit
6. Remove both screws fixing the guiding pin plate
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
57