Lcd Module - Barco Galaxy NH-12 Service Manual

Image 7-110
Desktop input unit: fixing screws
7.9

LCD module

Description of the LCD module
The LCD module is fixed to the desktop input unit.
This LCD panel displays messages coming from the processor on the PMP.
Necessary tools
Torx screwdriver T10
How to remove the LCD module?
1. Remove the desktop input unit (see chapter Desktop input board)
2. Disconnect the LCD from the desktop input board:
- J300: data to the LCD module
- J301: backlight to the LCD module
3. Remove the screws fixing the LCD module to the desktop input module
Image 7-111
LCD module: fixing screws
4. Remove the LCD module
How to install the LCD module?
1. Put the LCD module in the correct position and fix it using four screws
R59770141 GALAXY NH-12 20/02/2008
7. Electronic parts and servicing procedures
89