Mains Pulse Filter - Barco Galaxy NH-12 Service Manual

7. Electronic parts and servicing procedures
Image 7-8
Mains filter: connectors
6. Remove the nuts to release the mains filter
Image 7-9
Mains filter: fixing nuts
Note: Only one nut is visible on the image, the other nut is located behind the mains filter!
7. Lift the mains filter and slide it out to remove it
Installation of the new mains filter: follow the procedure above in reverse order.
When installing a mains filter, make sure that the grounding connector (= 3
mains input assembly.
7.1.3 Mains pulse filter
Description
The mains pulse filter reduces or removes harmful pulses coming from the mains power.
Image 7-10
Mains pulse filter
42
rd pin) points to the inside of the
R59770141 GALAXY NH-12 20/02/2008